Cable Management Accesories

The following products can be retro-fitted to equipment racks to facilitate the safe and secure control of patchcord cables. Each product has an open slot in the front allowing the plate to be mounted behind or in-front of pre-installed equipment such as switches and servers.

A minimum bend-radius of 30mm is maintained by guiding patchcords around or over the mandrels, and strain-relief can be achieved by applying a silicon band over the two guiding faces. These products require space at the side and the front of the rack so site measurements may be needed.

Patchcord Retainer (for 800mm wide racks)

Features

• Guides the patch cords around 19’’ verts
• Suitable for standard 19’’ verts
• Height 1 U
• Left and right mountable (40 mm side space required)
• Colours grey and black

Fan-out Retainer (for 800mm wide racks)

Features

• Guides fan outs safely around 19’’ verts
• Suitable for standard 19’’ verts
• Height 1 U
• Left and right mountable (40 mm side space required)
• Colours grey and black

Patchcord Guide (for 600mm wide racks)

Features

• Guides the patch cords around 19’’ verts
• Suitable for standard 19’’ verts
• Height 1U
• Left and right mountable
• Colours grey and black