Technical data of MMBX pcb connectors | |||||||||||||||||||
| Electrical data | CECC 22000 |
Requirements Nominal PCB distance 6.7 mm/.264 in. |
Requirements Nominal PCB distance 11.7mm/.461 in. |
||||||||||||||||
| Impedance |
50 
|
50
|
|||||||||||||||||
| Frequency range | DC - 12.4 GHz | DC - 12.4 GHz | |||||||||||||||||
| Dielectric withstanding voltage 1) | 4.4.5 |
1 kV rms, 50 Hz |
1 kV rms, 50 Hz |
||||||||||||||||
| Working voltage 1) |
IEC 169-1 11.6.1 |
≤ 330 V rms, 50 Hz |
≤ 330 V rms, 50 Hz |
||||||||||||||||
| Insulation resistance | 4.4.4 |
≥ 1 G
|
≥ 1 G
|
||||||||||||||||
|
Contact resistance - centre contact - outer contact |
4.4.2 4.4.3 |
≤ 5 m ≤ 1 m
|
≤ 5 m ≤ 1 m
|
||||||||||||||||
1 at sea level
| |||||||||||||||||||
| Mechanical data |
CECC 22000 |
Requirements 6 slots |
Requirements 4 slots |
||||||||||||||||
| Engagement force 2 | 4.5.4 | < 15 N / 3.4 lbs | < 20 N / 4.5 lbs | ||||||||||||||||
| Disengagement force 2 | 4.5.4 | < 15 N / 3.4 lbs | < 20 N / 4.5 lbs | ||||||||||||||||
| Contact captivation | 4.5.2 | 10 N / 2.3 lbs | 10 N / 2.3 lbs | ||||||||||||||||
| Durability (matings) | 4.7.1 | 100 | 100 | ||||||||||||||||
2 slideside
| |||||||||||||||||||
| Return loss | Requirements | ||||||||||||||||||
| Nom. board-to-board dist. | 6.7 mm / .2638" | 11.7 mm / .4606 in. | 20.0 mm / .7874 in. | ||||||||||||||||
| Typical return loss 3 | |||||||||||||||||||
|
- up to 2.5 GHz - 2.5 up to 6 GHz |
26 dB 25 dB |
26 dB 19 dB |
26 dB 19 dB |
||||||||||||||||
3 board-to-board = two PCB connectors + one adaptor (without termination to PCB)
| |||||||||||||||||||
| Processing data | Requirements | ||||||||||||||||||
|
Adherent to the print - shearing |
150 N / 33.7 lbs |
||||||||||||||||||
| - pulling (vertical to PCB) | 150 N / 33.7 lbs | ||||||||||||||||||
| |||||||||||||||||||
| Material data | |||||||||||||||||||
| Connector parts | Material | Plating | |||||||||||||||||
| Centre contact | brass | SUCOPRO / gold | |||||||||||||||||
| Outer contact | bronze | SUCOPRO | |||||||||||||||||
| Body | brass | SUCOPRO | |||||||||||||||||
| Insulators | LCP / PTFE / PFA | ||||||||||||||||||
| |||||||||||||||||||
|
Environmental data |
CECC 22000 TEST CONDITIONS |
Equivalent mil test conditions |
|||||||||||||||||
| Temperature range | -55°C ... +155°C / - 67° F ... + 311° F | ||||||||||||||||||
| Climatic category | → 55 / 155 /21 | ||||||||||||||||||
| Thermal shock | 4.6.7 → IEC 68-2-14 Na | MIL-STD-202, Method 107 G, Condition B1 | |||||||||||||||||
| Moisture resistance | 4.6.6 → IEC 68-2-3 Ca | MIL-STD-202, Method 106 F | |||||||||||||||||
| Corrosion | 4.6.10 → IEC 68-2-11 Ka | MIL-STD-202, Method 101, Condition B | |||||||||||||||||
| Vibration | 4.6.3 → IEC 68-2-6 Fc | MIL-STD-202, Method 204 D, Condition A | |||||||||||||||||
Some connectors mCorrosionay have a specification that differs from the above mentioned data.
The products are designed and guaranteed to pass the above mentioned test procedures. Any additional or different requirement arising from specific applications or environmental conditions which is not covered by these test procedures is subject to request.
