Coaxial terminations online data base |
|
|
|
|
|
|
|
|
|
| Item details | |||||||||
| HUBER+SUHNER Type | 6550.17.BB | ||||||||
| |||||||||
| Termination Description | Standard Termination, Medium Power | ||||||||
| Series / Configuration Highlights |
| ||||||||
| Item number | 22643793 | ||||||||
| Data sheet | |||||||||
| 2002/95/EC (RoHS) | compliant | ||||||||
| 2002/96/EC (WEEE) | no special marking needed | ||||||||
| Interface Standard1 | IEC 60169-16; MIL-STD-348A/304; CECC 22210 | ||||||||
| Remarks | 50 Watt, if the termination is mounted on an additional heat sink with a max. thermal resistance (Rth) of 5 K/Watt. Without additional heat sink this termination is applicable up to 25 Watts only. | ||||||||
| Important note |  WARNING: Beryllia Ceramic Inside! DO NOT sand, scrap or tamper with. Dispose in accordance with all relevant regulations. Details see section material. | ||||||||
| |||||||||
| Electrical data | Jump to [Top] | ||||||||
| Nominal Impedance1 | Interface N - jack (female) | 50 | Ω | ||||||
| Average Power | to 25 °C ambient temperature linearly derated to 0 W at 150 °C ambient temperature Graph see below | 50 | W | ||||||
| Peak Power | during max. 5 µs | 1500 | W | ||||||
| Frequency range Frame | 0 to 2 | GHz | |||||||
| VSWR Frame | ≤ 1.1 | ||||||||
| Return Loss Frame | > 26.44 | dB | |||||||
| |||||||||
| Mechanical data | Jump to [Top] | ||||||||
| Length Coaxial | 74 | mm | |||||||
| |||||||||
| Environmental and general data | Jump to [Top] | ||||||||
| Weight | 0.135 | kg | |||||||
| |||||||||
| Material data | Jump to [Top] | ||||||||
| Resistor Substrate Material | Beryllium Oxide | WARNING: Beryllia Ceramic Inside! DO NOT sand, scrap or tamper with. Dispose in accordance with all relevant regulations. | |||||||
| 2002/95/EC (RoHS) | compliant | ||||||||
| 2002/96/EC (WEEE) | no special marking needed | ||||||||
| N - jack (female) – Interface | |||||||||
| Piece part | Base material | Plating | |||||||
| Center contact | Copper Beryllium Alloy | Gold Plating (without Nickel underplating) | |||||||
| Outer contact | Brass | SUCOPLATE (R) Plating | |||||||
| Insulator | PFA / PTFE | ||||||||
| Heat sink body | Aluminium | Anodized | |||||||
| |||||||||
| Tests | Jump to [Top] | ||||||||
| Following tests have been passed successfully. For any details please contact your nearest HUBER+SUHNER representative. | |||||||||
| Test description | Specification / Paragraph / Method | ||||||||
